1#@!#!123s

: / usr / bin /
Filename : mktexpk
back
#!/bin/sh
# original mktexpk -- make a new PK font, because one wasn't found.
# 
# (If you change or delete the word `original' on the previous line,
# installation won't write this script over yours.)
# 
# Originally written by Thomas Esser, Karl Berry, and Olaf Weber.
# Public domain.

version='$Id: mktexpk 53602 2020-01-30 22:18:33Z karl $'
progname=`echo $0 | sed 's%.*/%%'`

# preferentially use subprograms from our own directory.
mydir=`echo "$0" | sed 's,/[^/]*$,,'`
mydir=`cd "$mydir" && pwd`
PATH="$mydir:$PATH"; export PATH

usage="Usage: $progname [OPTIONS] NAME [REDIRECT],
  Create a PK font.

--dpi DPI           use resolution DPI.
--bdpi BDPI         use base resolution BDPI.
--mag MAG           use magnification MAG.
--mfmode MODE       use MODE as the METAFONT mode.
--destdir DESTDIR   write fonts in DESTDIR.

Try to create a bitmap PK file for NAME at resolution DPI, with an
assumed device base resolution of BDPI, and a Metafont \`mag' of
MAG. Use MODE for the METAFONT mode.  Use DESTDIR for the root of where
to install into, either the absolute directory name to use (if it starts
with a /) or relative to the default DESTDIR (if not). REDIRECT, if
supplied, is a string of the form '>&n', where n is the number of the
file descriptor which is to receive, instead of stdout, the name of the
newly created pk file.

If you expected the font to be available as an outline, and thus this
script does not work and should not have been called, most likely the
font's .tfm name is missing from the relevant map file (i.e.,
psfonts.map for dvips-syntax programs, pdftex.map for pdftex-syntax
programs).  These map files are typically maintained using updmap; q.v.

For step-by-step instructions on making new fonts known to TeX, see
https://tug.org/fonts/fontinstall.html.

Report bugs to: tex-k@tug.org
TeX Live home page: <https://tug.org/texlive/>
"

# Handle non-positional options, except for --version/--help
while test $# -gt 0; do
  case "$1" in
    --destdir) shift; DEST="$1"; shift ;;
    --destdir=*) DEST=`echo "$1" | sed 's/--destdir=//'`; shift ;;
    --dpi) shift; DPI="$1"; shift ;;
    --dpi=*) DPI=`echo "$1" | sed 's/--dpi=//'`; shift ;;
    --bdpi) shift; BDPI="$1"; shift ;;
    --bdpi=*) BDPI=`echo "$1" | sed 's/--bdpi=//'`; shift ;;
    --mfmode) shift; test "x$1" != "x/" && MODE="$1"; shift ;;
    --mfmode=*) test "x$1" != "x--mfmode/" \
                && MODE=`echo "$1" | sed 's/--mfmode=//'`; shift ;;
    --mag) shift; MAG="$1"; shift;;
    --mag=*) MAG=`echo "$1" | sed '/s--mag=//'`; shift;;
    --version|-version) break ;;
    --help|-help) break ;;
    *) break ;;
  esac
done

if test "x$2" != x; then
  tail="`echo \"x$2\" | sed 's/^x>&//' | grep '^[0-9]*$'`"
  if test -z "$tail"; then
    echo "$progname: argument '$2' ignored - bad file number" >&2
  elif test "$tail" != 1; then
      eval 'exec 1>&$tail'
  fi
fi

mt_max_args=2

# Common code for all scripts.
: ${MT_TEXMFMAIN=`kpsewhich --expand-path='$TEXMFMAIN'`}
: ${MT_MKTEX_OPT=`kpsewhich --format='web2c files' mktex.opt`}
test -n "$MT_MKTEX_OPT" || MT_MKTEX_OPT="$MT_TEXMFMAIN/web2c/mktex.opt"
if test ! -f "$MT_MKTEX_OPT"; then
  echo "$progname: Cannot find mktex.opt; check your installation." >&2
  exit 1
fi

. "$MT_MKTEX_OPT"

# Where do potential driver files belong?
case "$MT_FEATURES" in
  *nomfdrivers*)
     : ${MT_MFDESTDIR=`pwd`}
     export MT_MFDESTDIR;;
esac

# Since we want to pass the generated filename and only that filename
# back to the caller on standard output, we do some redirections so
# regular echo's will end up on stderr, and do an echo >$STDOUT at the end.
# Then the contents of $STDOUT will be echoed to stdout by a trap.

# start of redirection stdout -> stderr, stdin <- /dev/null
(

NAME=$1

if kpsewhich $NAME.mf >/dev/null 2>&1 || mktexmf $NAME >/dev/null 2>&1; then
  # determine the progname of metafont to use; prefer mf-nowin.
  if (mf-nowin --version) >/dev/null 2>&1; then
    MF="mf-nowin -progname=mf"
  else
    MF=mf
  fi

  # Check that $BDPI and $MODE are consistent; if not, ignore the mode and
  # hope we can correctly guess it from bdpi.  (People like to specify the
  # resolution on the command line, not the mode so much.)
  if test -n "$MODE"; then
    mf_bdpi=`$MF \
'\mode:='$MODE';mode_setup;message"BDPI= "&decimal round pixels_per_inch;end.'\
             </dev/null \
             | awk '/DPI=/ {print $2}'`
    if test "x$mf_bdpi" != x$BDPI; then
      echo "$progname: Mismatched mode $MODE and resolution $BDPI; ignoring mode." >&2
      MODE=
    fi
  fi

  # If an explicit mode is not supplied, try to guess. You can get a
  # list of extant modes from ftp://ftp.tug.org/tex/modes.mf.
  if test -z "$MODE" || test "x$MODE" = xdefault; then
    case "$BDPI" in
      85) MODE=sun;;
     100) MODE=nextscrn;;
     180) MODE=toshiba;;
     300) MODE=cx;;
     360) MODE=epstylus;;
     400) MODE=nexthi;;
     600) MODE=ljfour;;
     720) MODE=epscszz;;
    1200) MODE=ultre;;
    1270) MODE=linoone;;
    8000) MODE=dpdfezzz;;
       *) echo "$progname: Can't guess mode for $BDPI dpi devices." >&2
          echo "$progname: Use a config file or option to specify the mode; see:" >&2
          echo "$progname: https://tug.org/texinfohtml/kpathsea.html#Unable-to-generate-fonts" >&2
          exit 1
    esac
  fi

  # Run Metafont. Always use plain Metafont, since reading cmbase.mf
  # does not noticeably slow things down.
  cmd="$MF \mode:=$MODE; mag:=$MAG; nonstopmode; input $NAME"
else
  MODE=modeless
  # ps_to_pk is set in mktex.opt
  case $ps_to_pk in
    gsftopk)
      if $ps_to_pk -t "$NAME"; then
        cmd="$ps_to_pk $NAME $DPI"
      fi;;
    ps2pk)
      # grep for the font in $PSMAPFILE.  These are base font names, such as
      # rpplr (the original) or pplr0 (an interim step) or pplr8r (current).
      : ${PSMAPFILE=`kpsewhich --format=map psfonts.map ps2pk.map`}
      pattern="^$NAME"'([ 	]|$)' 
      psline=`egrep "$pattern" $PSMAPFILE | tail -1`
      if test -n "$psline"; then
        set x `echo "$psline" | sed 's%[<["]%%g'`
        shift; shift; shift;
        encoding=; psname=; slant=; extend=
        while test ! -z "$1"; do
          case "$1" in
            *.enc)       encoding="-e $1";;
            *.pf[ab])    psname="$1";;
            *SlantFont)  slant="-S $lastopt";;
            *ExtendFont) extend="-E $lastopt";;
          esac
          lastopt="$1"
          shift
        done
        # Guessing the name of the type1 font file as fallback:
        ANAME=`echo $NAME | sed 's/8r$/8a/'`
        for i in $NAME.pfa $NAME.pfb $ANAME.pfa $ANAME.pfb; do
          if kpsewhich $i >/dev/null 2>&1; then
            psname=$i
            break
          fi
        done

        if [ -n "$psname" ]; then
          cmd="ps2pk -v -X$DPI -R$BDPI $slant $extend $encoding $psname $NAME.${DPI}pk"
        else
          if gsftopk -t "$NAME"; then
            echo "$progname: cannot find $NAME.pfa or $NAME.pfb. Trying gsftopk." >&2
            cmd="gsftopk $NAME $DPI"
          fi
        fi
      fi;;
  esac

  # unsupported by $ps_to_pk, try other conversions:
  if test -z "$cmd"; then
    if (ttf2pk -t -q $NAME) >/dev/null 2>&1; then
      cmd="ttf2pk -q $NAME $DPI"
    elif (hbf2gf -t -q $NAME) >/dev/null 2>&1; then
      cmd="hbf2gf -q -p $NAME $DPI"
    else
      echo "$progname: don't know how to create bitmap font for $NAME." >&2
      echo "$progname: perhaps $NAME is missing from the map file." >&2
      exit 1
    fi
  fi
fi

OIFS=$IFS; IFS=$SEP
set x `"$MT_MKTEXNAM" $NAME $DPI $MODE $DEST`; shift
IFS=$OIFS

PKDEST="$1"
PKDESTDIR=`echo "$PKDEST" | sed 's%/[^/][^/]*$%%'` # can't rely on dirname
PKNAME=`basename "$PKDEST"`
GFNAME=$NAME.${DPI}gf

if test -r "$PKDESTDIR/$PKNAME"; then
  echo "$progname: $PKDESTDIR/$PKNAME already exists." >&2
  echo "$PKDESTDIR/$PKNAME" >$STDOUT
  "$MT_MKTEXUPD" "$PKDESTDIR" $PKNAME
  exit 0
fi

"$MT_MKTEXDIR" "$PKDESTDIR"
if test ! -d "$PKDESTDIR"; then
  echo "$progname: $MT_MKTEXDIR $PKDESTDIR failed." >&2
  exit 1
fi

echo "$progname: Running $cmd"
$cmd </dev/null || {
  # Don't abort if only "Strange path", "bad pos" or "angle(0,0)"
  # errors occurr.
  grep '^!' $NAME.log | sort >$$.errs 2>/dev/null
  grep '^! Strange path' $$.errs >$$.strange 2>/dev/null
  grep '^! bad pos.' $$.errs >$$.badpos 2>/dev/null
  grep '^! angle(0,0) is taken as zero.' $$.errs >$$.angle 2>/dev/null
  cat $$.badpos $$.strange $$.angle | sort > $$.errs_accept
  if cmp $$.errs $$.errs_accept >/dev/null 2>&1; then
    test -s $$.strange >/dev/null 2>&1 \
      && echo "$progname: warning: \`$cmd' caused strange path errors." >&2
    test -s $$.badpos >/dev/null 2>&1 \
      && echo "$progname: warning: \`$cmd' caused bad pos errors." >&2
    test -s $$.angle >/dev/null 2>&1 \
      && echo "$progname: warning: \`$cmd' caused angle(0,0) errors." >&2
  else
    echo "$progname: \`$cmd' failed." >&2
    test -s $NAME.log && mv -f $NAME.log "$KPSE_DOT"
    exit 1;
  fi
}

test -r $GFNAME && { gftopk ./$GFNAME $PKNAME || exit 1; }
test ! -f $PKNAME && test -f $NAME.${DPI}pk && mv $NAME.${DPI}pk $PKNAME
if test ! -s $PKNAME; then
  echo "$progname: \`$cmd' failed to make $PKNAME." >&2
  exit 1
fi

# Install the PK file carefully, since others may be working simultaneously.
# Use cp when mv fails, since DOS will fail mv for deeply-nested directories.
mv $PKNAME "$PKDESTDIR/pk$$.tmp" 2>/dev/null \
  || cp $PKNAME "$PKDESTDIR/pk$$.tmp" || exit 1
cd "$PKDESTDIR" || exit 1
chmod `kpsestat -xst,go-w .` pk$$.tmp
test -r $PKNAME || mv pk$$.tmp $PKNAME || exit 1

# Update ls-R if necessary.
"$MT_MKTEXUPD" "$PKDESTDIR" $PKNAME

# If this line (or an equivalent) is not present, dvipsk/xdvik/dviljk
# will think mktexpk failed.  Any other output to stdout will also lose.
echo "$PKDESTDIR/$PKNAME" >$STDOUT
echo "$progname: $PKDESTDIR/$PKNAME: successfully generated." >&2
) 1>&2 </dev/null