1#@!#!123s

: / bin / X11 / X11 / X11 /
Filename : cover
back
#!/usr/bin/perl

# Copyright 2001-2019, Paul Johnson (paul@pjcj.net)

# This software is free.  It is licensed under the same terms as Perl itself.

# The latest version of this software should be available from my homepage:
# http://www.pjcj.net

require 5.10.0;

use strict;
use warnings;

our $VERSION;
BEGIN {
our $VERSION = '1.36'; # VERSION
}

use Devel::Cover::DB;
use Devel::Cover::Inc;

BEGIN { $VERSION //= $Devel::Cover::Inc::VERSION }

use Config;
use File::Spec;
use File::Find ();
use File::Path;
use Getopt::Long;
use Pod::Usage;
use Storable qw( dclone );

use Devel::Cover::Dumper;  # For debugging
use Data::Dumper ();  # no import of Dumper (use Devel::Cover::Dumper if needed)

my $Options = {
    add_uncoverable_point    => [],
    annotation               => [],
    coverage                 => [],
    delete                   => undef,
    delete_uncoverable_point => [],
    gcov                     => $Config{gccversion},
    ignore                   => [],
    ignore_re                => [],
    launch                   => 0,
    make                     => $Config{make},
    prefer_lib               => 0,
    report                   => [],
    report_c0                => 75,
    report_c1                => 90,
    report_c2                => 100,
    select                   => [],
    select_re                => [],
    summary                  => 1,
    uncoverable_file         => [],
        # .uncoverable and ~/.uncoverable are always checked
};

sub get_options {
    Getopt::Long::Configure("pass_through");
    die "Bad option" unless
        GetOptions($Options,            # Store the options in the Options hash.
                   "write:s" => sub {
                       @$Options{qw( write summary )} = ($_[1], 0)
                   },
                   qw(
                       add_uncoverable_point=s
                       annotation=s
                       clean_uncoverable_points!
                       coverage=s
                       delete!
                       delete_uncoverable_point=s
                       dump_db!
                       gcov!
                       help|h!
                       ignore_re=s
                       ignore=s
                       info|i!
                       launch!
                       make=s
                       outputdir=s
                       prefer_lib!
                       report_c0=s
                       report_c1=s
                       report_c2=s
                       report=s
                       select_re=s
                       select=s
                       silent!
                       summary!
                       test!
                       uncoverable_file=s
                       version|v!
                     ));
    Getopt::Long::Configure("nopass_through");
    $Options->{report} = ["html"]
        if !@{$Options->{report}} && !exists $Options->{write};

    # handle comma seperated ops, like -coverage branch,statement

    # also accept them in the same format they're output
    my %coverage_abbrev = (
        stmt => "statement",
        bran => "branch",
        cond => "condition",
        sub  => "subroutine",
    );

    my %coverage_allowed = map {$_ => 1} values %coverage_abbrev, "time", "pod";

    # expanding 'default' to all available
    @{$Options->{coverage}} = map {
        $_ eq "default" ? (keys %coverage_allowed) : $_
    } split(/,/, join(",", @{$Options->{coverage}}));

    # delete exclusions from that list
    for my $exclusion (grep /^-/, @{$Options->{coverage}}) {
        $exclusion = substr($exclusion, 1);  # chop off leading -
        $Options->{coverage} = [grep $_ ne $exclusion, @{$Options->{coverage}}];
    }

    my %options_coverage = map {$_ => 1} @{$Options->{coverage}};
    while (my ($abbr, $full) = each %coverage_abbrev) {
        $options_coverage{$full} = delete $options_coverage{$abbr}
            if $options_coverage{$abbr};
    }

    @{$Options->{coverage}} = keys %options_coverage;

    # generating data may take time, so bail now if options are wrong
    for my $cov (@{$Options->{coverage}}) {
        die "Unrecognised -coverage: $cov" unless $coverage_allowed{$cov};
    }
}

sub delete_db {
    for my $del (@_) {
        my $db = Devel::Cover::DB->new(db => $del);
        unless ($db->is_valid) {
            print "Devel::Cover: $del is an invalid database - ignoring\n"
                unless $Options->{silent};
            next;
        }
        print "Deleting database $del\n" if $db->exists && !$Options->{silent};
        $db->delete;
        rmtree($del);
    }
}

# Decide whether to run ./Build test or make test
sub test_command { -e "Build" ? mb_test_command() : mm_test_command() }

# Compiler arguments necessary to do a coverage run
sub gcov_args() { "-fprofile-arcs -ftest-coverage" }

# Test command for MakeMaker
sub mm_test_command {
    my $test = "$Options->{make} test";
    if ($Options->{gcov}) {
        my $o = gcov_args();
        $test .= qq{ "OPTIMIZE=-O0 $o" "OTHERLDFLAGS=$o"};
    }
    $test
}

# Test command for Module::Build
sub mb_test_command {
    my $builder = File::Spec->catfile(File::Spec->curdir, "Build");
    my $test = "$builder test";
    if ($Options->{gcov}) {
        my $c = my $l = gcov_args();
        if (my $params = do './_build/build_params') {
            $c = join(' ', @{$params->[-1]{extra_compiler_flags} || []}, $c);
            $l = join(' ', @{$params->[-1]{extra_linker_flags} || []}, $c);
        }
        $test .= qq{ --extra_compiler_flags="-O0 $c" --extra_linker_flags="$l"};
    }
    $test
}

sub main {
    $|++;  # try to impose order on STDOUT and STDERR

    if (!$ENV{DEVEL_COVER_SELF} && $INC{"Devel/Cover.pm"}) {
        my $err = "$0 shouldn't be run with coverage turned on.\n";
        eval {
            require POSIX;
            print STDERR $err;
            POSIX::_exit(1);
        };
        die $err;
    }

    get_options;

    $Devel::Cover::Silent = 1 if $Options->{silent};

    $Options->{report} = [ grep {
        my $report = $_;
        my $format = "Devel::Cover::Report::\u$report";
        eval ("use $format");
        if ($@) {
            print "Error: $report is not a recognised output format\n$@\n\n";
            ()
        } else {
            $report
        }
    } @{$Options->{report}} ];

    exit 1 if !@{$Options->{report}} &&
              !$Options->{delete} && !exists $Options->{write};

    $Options->{annotations} = [];
    for my $a (@{$Options->{annotation}}) {
        my $annotation = "Devel::Cover::Annotation::\u$a";
        eval ("use $annotation");
        if ($@) {
            print "Error: $a is not a recognised annotation\n\n$@";
            exit 1;
        }
        my $ann = $annotation->new;
        $ann->get_options($Options) if $ann->can("get_options");
        push @{$Options->{annotations}}, $ann;
    }

    print "$0 version $VERSION\n" and exit 0 if $Options->{version};
    pod2usage(-exitval => 0, -verbose => 1)   if $Options->{help};
    pod2usage(-exitval => 0, -verbose => 2)   if $Options->{info};

    my @argv = @ARGV;
    my $options = dclone($Options);
    my $report = $Options->{report}[0];
    my $format = "Devel::Cover::Report::\u$report";
    $format->get_options($options) if $format->can("get_options");
    my $dbname = File::Spec->rel2abs(@ARGV ? shift @ARGV : "cover_db");
    die "Can't open database $dbname\n"
        if !$Options->{delete} && !$Options->{test} && !-d $dbname;

    $Options->{outputdir} = $dbname unless exists $Options->{outputdir};
    my $od = File::Spec->rel2abs($Options->{outputdir});
    $Options->{outputdir} = $od if defined $od;
    mkpath($Options->{outputdir}) unless -d $Options->{outputdir};

    if ($Options->{delete}) {
        delete_db($dbname, @ARGV);
        exit 0
    }

    my $test_result = 0;
    if ($Options->{test}) {
        # TODO - make this a little more robust
        # system "$^X Makefile.PL" unless -e "Makefile";
        delete_db($dbname, @ARGV) unless defined $Options->{delete};
        my $env_db_name = $dbname;
        $env_db_name =~ s/\\/\\\\/g if $^O eq 'MSWin32';
        $env_db_name =~ s/ /\\ /g;
        my $extra = "";
        $extra .= ",-coverage,$_" for @{$Options->{coverage}};
        $extra .= ",-ignore,$_"
            for @{$Options->{ignore_re}},
                map quotemeta, map glob, @{$Options->{ignore}};
        $extra .= ",-select,$_"
            for @{$Options->{select_re}},
                map quotemeta, map glob, @{$Options->{select}};

        $Options->{$_} = [] for qw( ignore ignoring select select_re );

        local $ENV{ -d "t" ? "HARNESS_PERL_SWITCHES" : "PERL5OPT" } =
            ($ENV{DEVEL_COVER_TEST_OPTS} || "") .
            " -MDevel::Cover=-db,$env_db_name$extra";

        my $test = test_command();

        # touch the XS, C and H files so they rebuild
        if ($Options->{gcov}) {
            my $t = $] > 5.7 ? undef : time;
            my $xs = sub { utime $t, $t, $_ if /\.(xs|cc?|cpp|hh?|hpp)$/ };
            File::Find::find({ wanted => $xs, no_chdir => 0 }, ".");
        }
        # print STDERR "$_: $ENV{$_}\n" for qw(PERL5OPT HARNESS_PERL_SWITCHES);
        print STDERR "cover: running $test\n";
        $test_result = system $test;
        $test_result >>= 8;
        $Options->{report} = ["html"]  unless @{$Options->{report}};
    }

    if ($Options->{gcov}) {
        my $gc = sub {
            return unless /\.(xs|cc?|hh?)$/;
            for my $re (@{$Options->{ignore_re}}) {
                return if /$re/;
            }
            my ($name) = /([^\/]+$)/;

            # Don't bother running gcov if there's no index files.
            # Otherwise it's noisy.
            my $graph_file = $_;
            $graph_file =~ s{\.\w+$}{.gcno};
            return unless -e $graph_file;

            my @c = ("gcov", "-abc", "-o", $File::Find::dir, $name);
            print STDERR "cover: running @c\n";
            system @c;
        };
        File::Find::find({ wanted => $gc, no_chdir => 1 }, ".");
        my @gc;
        my $gp = sub {
            return unless /\.gcov$/;
            my $xs = $_;
            return if $xs =~ s/\.(cc?|hh?)\.gcov$/.xs.gcov/ && -e $xs;
            s/^\.\///;
            push @gc, $_;
        };
        File::Find::find({ wanted => $gp, no_chdir => 1 }, ".");
        if (@gc) {
            # Find the right gcov2perl based on this current script
            require Cwd;
            my $path = Cwd::abs_path($0);
            my ($vol, $dir, $cover) = File::Spec->splitpath($path);
            my $gcov2perl = File::Spec->catpath($vol, $dir, 'gcov2perl');
            my $o = $ENV{DEVEL_COVER_TEST_OPTS};
            my @opts = defined $o ? split " ", $o : ();
            # print STDERR "cover: test [$o]\n";
            my @c = ($^X, @opts, $gcov2perl, "-db", $dbname, @gc);
            print STDERR "cover: running @c\n";
            system @c;
        }
    }

    print "Reading database from $dbname\n" unless $Options->{silent};
    my $db = Devel::Cover::DB->new(
        db               => $dbname,
        prefer_lib       => $Options->{prefer_lib},
        uncoverable_file => $Options->{uncoverable_file},
    );
    $db = $db->merge_runs;

    $db->add_uncoverable     ($Options->{add_uncoverable_point}   );
    $db->delete_uncoverable  ($Options->{delete_uncoverable_point});
    $db->clean_uncoverable if $Options->{clean_uncoverable_points} ;
    exit $test_result if @{$Options->{add_uncoverable_point}}    ||
                         @{$Options->{delete_uncoverable_point}} ||
                         $Options->{clean_uncoverable_points};

    my $structure;
    my $read_structure = sub {
        unless ($structure) {
            $structure = Devel::Cover::DB::Structure->new(base => $dbname);
            $structure->read_all;
        }
    };

    for my $merge (@ARGV) {
        $read_structure->();
        print "Merging database from $merge\n" unless $Options->{silent};
        my $mdb = Devel::Cover::DB->new(db => $merge);
        $mdb = $mdb->merge_runs;
        $db->merge($mdb);
        my $mst = Devel::Cover::DB::Structure->new(base => $merge);
        $mst->read_all;
        # print STDERR "Merging structure", Dumper($structure),
                     # "From ", Dumper($mst);
        $structure->merge($mst);
        $db->set_structure($structure);
        # print STDERR "Merged structure", Dumper($structure);
    }

    if ($Options->{dump_db}) {
        my $d = Data::Dumper->new([$db], ["db"]);
        $d->Indent(1);
        $d->Sortkeys(1) if $] >= 5.008;
        print $d->Dump;
        $read_structure->();
        my $s = Data::Dumper->new([$structure], ["structure"]);
        $s->Indent(1);
        $s->Sortkeys(1) if $] >= 5.008;
        print $s->Dump;
        exit $test_result;
    }

    if (exists $Options->{write}) {
        $dbname = $Options->{write} if length $Options->{write};
        print "Writing database to $dbname\n" unless $Options->{silent};
        $db->write($dbname);
        $read_structure->();
        $structure->write($dbname);
    }

    $db->clean;

    exit $test_result unless $Options->{summary} || @{$Options->{report}};

    $Options->{coverage}    = [ $db->collected ] unless @{$Options->{coverage}};
    $Options->{show}        = { map { $_ => 1 } @{$Options->{coverage}} };
    $Options->{show}{total} = 1 if keys %{$Options->{show}};

    $db->calculate_summary(map { $_ => 1 } @{$Options->{coverage}});

    print "\n\n" unless $Options->{silent};

    # TODO - The sense of select and ignore should be reversed to match
    # collection - check this

    my %f = map { $_ => 1 } (@{$Options->{select}}
                             ? map glob, @{$Options->{select}}
                             : $db->cover->items);
    delete @f{map glob, @{$Options->{ignore}}};

    my $keep = sub {
        my ($f) = @_;
        return 0 unless exists $db->{summary}{$_};
        for (@{$Options->{ignore_re}}) {
            return 0 if $f =~ /$_/
        }
        for (@{$Options->{select_re}}) {
            return 1 if $f =~ /$_/
        }
        !@{$Options->{select_re}}
    };
    @{$Options->{file}} = sort grep $keep->($_), keys %f;

    $db->print_summary($Options->{file}, $Options->{coverage}, {force => 1})
        if $Options->{summary};

    for my $report (@{$Options->{report}}) {
        @ARGV = @argv;
        my $options = dclone($Options);
        my $format = "Devel::Cover::Report::\u$report";
        $format->get_options($options) if $format->can("get_options");
        $format->report($db, $options);

        if ($options->{launch}) {
            if ($format->can("launch")) {
                $format->launch($options);
            } else {
                print STDERR "The launch option is not available for the ",
                            "$options->{report} report.\n"
            }
        }
    }

    exit $test_result;
}

main

__END__

=head1 NAME

cover - report coverage statistics

=head1 VERSION

version 1.36

=head1 SYNOPSIS

 cover -test

 cover -report html_basic

=head1 DESCRIPTION

Report coverage statistics in a variety of formats.

The summary option produces a short textual summary.  Other reports are
available by using the report option.

The following reports are currently available:

 html        - detailed HTML reports  (default)
 html_basic  - detailed HTML reports with syntax highlighting
 text        - detailed textual summary
 compilation - output in a format similar to Perl errors
 json        - output in a JSON format
 vim         - show coverage information in vim gutter

=head1 OPTIONS

The following command line options are supported:

 -h -help              - show help
 -i -info              - show documentation
 -v -version           - show version

 -silent               - don't print informational messages (default off)
 -summary              - give summary report                (default on)
 -report report_format - report format                      (default html)
 -outputdir dir        - directory for output               (default given db)
 -launch               - launch report in viewer (if avail) (default off)

 -select filename      - only report on the file            (default all)
 -ignore filename      - don't report on the file           (default none)
 -select_re RE         - append to REs of files to select   (default none)
 -ignore_re RE         - append to REs of files to ignore   (default none)
 -write [db]           - write the merged database          (default off)
 -delete               - drop database(s)                   (default off)
 -dump_db              - dump database(s) (for debugging)   (default off)

 -coverage criterion   - report on criterion  (default all available)

 -test                 - drop database(s) and run make test (default off)
 -gcov                 - run gcov to cover XS code     (default on if using gcc)
 -make make_prog       - use the given 'make' program for 'make test'
 -prefer_lib           - prefer files in lib                (default off)

 -add_uncoverable_point    string
 -delete_uncoverable_point string
 -clean_uncoverable_points
 -uncoverable_file         file

 other options specific to the report format

 coverage_database [coverage_database ...]

The C<-report>, C<-select>, C<-ignore>, C<-select_re>, C<-ignore_re>, and
C<-coverage> options may be specified multiple times.

=head1 REPORT FORMATS

The following C<-report> options are available in the core module.  Other
reports may be available if they've been installed from external packages.

=over 4

=item html|html_minimal (default)

HTML reporting. Percentage thresholds are colour-coded and configurable
via -report_c0 <integer>, -report_c1 <integer> and -report_c2 <integer>.:

    0%      75%      90%      100%
    |   ..   |   ..   |   ..   |
       <c0      <c1      <c2   c3
       red     yellow   orange green

=item html_basic

HTML reporting with syntax highlighting if L<PPI::HTML> or L<Perl::Tidy>
module is detected. Like html|html_minimal reporting, percentage thresholds
are colour-coded and configurable.

=item text

Plain text reporting.

=item compilation

A textual report in a format similar to that output by Perl itself such that
the report may be used by your editor or other reporting tools to show where
coverage is missing.

=item json

A report in JSON format.

=item vim

A report suitable for use with the vim editor to show coverage data in the sign
column.

=back

=head1 DETAILS

Any number of coverage databases may be specified on the command line.
These databases will be merged and the reports will be based on the
merged information.  If no databases are specified the default database
(cover_db) will be used.

The C<-write> option will write out the merged database.  If no name is
given for the new database, the first database read in will be
overwritten.  When this option is used no reports are generated by
default.

Specify the C<-select>, C<-select_re>, C<-ignore>, and C<-ignore_re> options to
report on specific files.  C<-select> and C<-ignore> are interpreted as shell
globs; C<-select_re> and C<-ignore_re> are interpreted as regular expressions.

Specify C<-coverage> options to report on specific criteria.  By default all
available information on all criteria in all files will be reported.
Available coverage options are statement, branch, condition, subroutine, pod,
and default (which equates to all available options).  However, if you know
you only want coverage information for certain criteria it is better to only
collect data for those criteria in the first place by specifying them at that
point.  This will make the data collection and reporting processes faster and
less memory intensive.  See the documentation for L<Devel::Cover> for more
information.

If you want all *except* some criteria, then you can say something like
C<-coverage default,-pod>.

If you specify multiple C<-report> options, make sure that they do not
conflict.  For example, the different HTML reports will overwrite each other's
results.

The C<-test> option will delete the databases and run your tests to generate
new coverage data before reporting on it.  L<Devel::Cover> knows how to work
with standard Perl Makefiles as well as L<Module::Build> based distributions.
For detailed instructions see the documentation for ExtUtils::MakeMaker at
L<https://metacpan.org/module/ExtUtils::MakeMaker> or for Module::Build at
L<https://metacpan.org/module/Module::Build> both of which come as standard
in recent Perl distributions.

The C<-gcov> option will try to run gcov on any XS code.  This requires that
you are using gcc of course.  If you are using the C<-test> option will be
turned on by default.

The C<-prefer_lib> option tells Devel::Cover to report on files in the lib
directory even if they were used from the blib directory.

=head1 EXIT STATUS

The following exit values are returned:

0   All operations were completed successfully.

>0  An error occurred.

With the -test option the exit status of the underlying test run is returned.

=head1 SEE ALSO

L<Devel::Cover>

=head1 BUGS

Did I mention that this is alpha code?

See the BUGS file.

=head1 LICENCE

Copyright 2001-2019, Paul Johnson (paul@pjcj.net)

This software is free.  It is licensed under the same terms as Perl itself.

The latest version of this software should be available from my homepage:
http://www.pjcj.net

=cut